Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

PLANET Switch 10/100Mbps 48-port Rack Unmanaged

Forsiden Kommunikasjon Svitsjer PLANET Switch 10/100Mbps 48-port Rack Unmanaged
Du må logge inn for å handle/se priser.
PLANET Switch 10/ 100Mbps 48-port Rack Unmanaged (FNSW-4800)

PLANET Switch 10/100Mbps 48-port Rack Unmanaged

Varenr.:
FNSW-4800
EAN:
4711213687297
  • Produkt Ethernet
  • Porter 48
  • Hastighet 100Mbps
Butikklager Bestillingsvare Fjernlager Bestillingsvare
Beskrivelse

Planet Switch 10/100Mbps 48-port


FNSW-4800

Rack Unmanaged
48-Port 10/100Mbps Fast Ethernet Switch

With increasing bandwidth requirements for local area networks, PLANET's FNSW-4800 Fast Ethernet Switch is the ideal option to alleviate bottlenecks in client / server and peer-to-peer environments in a cost-effective way.

The Switch provides a combination of 48 Fast Ethernet Switching ports that provide users with high-speed network connections. With its Auto-Negotiation capability, all the RJ-45/STP ports of FNSW-4800 can be configured to speeds of 10/20Mbps or 100/200Mbps automatically. In addition, the product is equipped with the MDI/ MDIX auto-detection for easily plug and play connection, regardless of cabling types- straight through or crossover.

The high-performance throughput at filtering/forwarding rate is up to 14,880 packets per second in 10Mbps, and 148,800pps in 100Mbps. Along with Its dynamic shared memory buffer, the FNSW-4800 can boost bandwidth, eliminate unnecessary traffic, and relieve congestion on your critical server path.

Key Features

  • Complies with IEEE802.3 and 802.3u for 10 / 100Base-TX Fast Ethernet standard
  • 48-port 10 / 100Base-TX Fast Ethernet Switch
  • Wire-speed "Store-and-Forward" filtering / forwarding eliminates bad data packets with minimal delay
  • 100Base-TX ports automatically sense and set optimal line speed from
  • 10 / 20, 100 / 200Mbps, All 100Base-TX port support Auto-Negotiation function
  • Shared buffer memory and up to 8K Fast Ethernet Switch-entry MAC source address table make for fast handling of data packets
  • 2.5Mbit embedded memory for packet buffers
  • Auto-MDI / MDI-X detection supports
  • Flow control to eliminate packets loss
  • Supports up to 1522 bytes packet and 802.1Q VLAN transparent
  • Internal, full-range power supply suitable for worldwide use

Specification

Hardware Specification
Ports 48 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports
Switch Processing Scheme Store-and-forward
Address Table 8K entries
Share data Buffer 2.5Mbit
Throughput (packet per second) 6.6Mpps
Switch fabric 8.8Gbps
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
Dimensions (W x D x H) 440 x 200 x 44 mm, 1U height
Weight 2.8 kg
Power Requirement 100~240VAC, 0.5A, 50-60 Hz
Power Consumption / Dissipation 27 Watts maximum / 92 BTU/hr maximum
Temperature Operating: 0~50 Degree C
Storage -40~70 Degree C
Humidity Operating: 10~90%;
Storage: 5~95% (Non-condensing)
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3x (Flow control)

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.